Categories

System hiccups and false alarms can be aggravating, and even worse, might prevent your security system from working how it should. Fortunately, most issues, from dead batteries to false alarms, are simple to fix. Explore our suggestions for troubleshooting your home alarm system in Syracuse. We’ll help keep your family protected and your system operating as it should.

Test Your Home Security System In Syracuse

One effective way to troubleshoot your property’s defense is to test it! Newer systems have a test mode so you don’t mistakenly trigger an emergency response. After switching to test mode, do the following:

• Turn on your system as you normally would when heading out.
• Open a window or door that uses a contact sensor, or test other devices. Close the door or window so it doesn’t trip the alarm when you switch the system back on.
• Allow the alarm to sound for 60 seconds to ensure communications with the security company and to make an entry in the alarm system log.
• Proceed to test equipment as you wish
• Inspect the system activity log to verify functionality.

Rest assured, monitoring professionals can tell that your system is involved in a test. Be sure to switch out of test mode when you’re done. It’s smart to test once a month or anytime you adjust your home’s phone or internet connectivity.

Inspect The Positioning And State Of Motion Sensors

Although an crucial part of your alarm system, motion sensors are prone to false alarms. Do your part to prevent them with some simple troubleshooting.

• Perform a visual check. Is there something that could move within the sensor’s detection range, like drapery caught in a breeze?
• Is the sensor dirty? Cobwebs, dirt, and debris can cause poor performance. Check to confirm the device is clean.
• Does the motion detector have pet immunity you can enable? Some models can be programmed to disregard pets up to 100 pounds.
• When was the battery changed? Low batteries can affect performance or result in false alarms.
• Is the sensor pointing toward a source of heat? Excess heat from sunlight or a fireplace can set off an alarm.

Keep Batteries Ready And Watch Out For Low Battery Signals

One helpful aspect of the latest home security systems is that they’ll alert you when batteries are running low. If your system uses a control panel or app, you’ll usually find alerts there. Depending on your alarm, you could notice an occasional beep when batteries are getting low. 

Motion sensors, contact sensors, smoke detectors, and other wireless devices have batteries that should be replaced every so often. It’s wise to keep batteries around and set a replacement schedule. Some systems also have a backup battery for the primary control panel. This backup keeps your system running if you have a power outage and should recharge itself once the electricity is working again. If it fails to recharge, you will have to replace it.

Troubleshooting Is Effortless With ADT Home Security In Syracuse 

As the leading name in home security, ADT creates systems that provide unsurpassed functionality and convenience. Accessing test mode is easy through the ADT+ app or MyADT.com, and you’ll always be sent updates when a sensor battery is low. Get in touch with Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfect for your Syracuse home and family. Place a call to (315) 366-4153 or complete our form today!